Topic: Discussion OmniPeek winAircrack
Discussion for topics WiFi card Intel + winaircrack wep crack tutorial. No registration needed – but.. registered user are automaticly subscribed to the topic 🙂
Re: Discussion OmniPeek winAircrack
Has anyone actually got the above to work? This how-to is pretty thin.
Re: Discussion OmniPeek winAircrack
Does it work on Vista?
Re: Discussion OmniPeek winAircrack
Sadly there is no driver avail for Vista. The 10.5.1.72 has this the below in the .inf file and lots of other necessary data missing to prevent and install into Vista. The only way is to purchase a supported card at present and for Vista the Proxim Orinoco Gold 8480 FD would be a fair choice
;******************************************************************************
; Device
;——————————————————————————
;******************************************************************************
; Device Vista – an empty section to prevent installation on Vista with this inf
;——————————————————————————
[Device.NT.6.0]
;******************************************************************************
; Device W2K
;——————————————————————————
Re: Discussion OmniPeek winAircrack
Windows Vista is not supported by airopeek, aircrack or other proggys using the intel cards only xp
Re: Discussion OmniPeek winAircrack
joe: hello.., vista have possibility to run applications in the "compatibility mode" (xp do the same). In this mode you can run older appz. See also requirements.. I think Vista works.. Question is driver..
Re: Discussion OmniPeek winAircrack
Sure. My laptop D630 with the ipw3945 uses the 10.5.1.72 driver, it works. But the question is: the captured WEP data increases so slow, especially in low data exchange mode. How can I accelerate it? Under Windows some tools like void11 exits?
Re: Discussion OmniPeek winAircrack
Was anyone able to find OmniPeek 4.1, I was unable to find it. All the download links I found refer to OmniPeek website which no longer host the file. If someone could post a link I would be more than greatful.
Also I can’t seem to find WinAircrack for download. Thanks, Jose
Re: Discussion OmniPeek winAircrack
Download is possible at subdomain download (DIR software/sniffer file WildPackets-OmniPeek-Personal-4.1.zip).
Re: Discussion OmniPeek winAircrack
Hi, I have Omnipeek 4.1 and these not detect the chanel 13. Why? Netstumbler detects the channel 13 without problems. Regards! Julandron
Re: Discussion OmniPeek winAircrack
Hi. Netstumbler works with ch 13 with the driver used with OmniPeek?
Re: Discussion OmniPeek winAircrack
Hi, I’m using my laptop using the Intel CHIPSET 3945ABG. Never I have installed drivers for use Netstumbler or Omnipeek
Re: Discussion OmniPeek winAircrack
How many filtered paquets I need capture before using aircrack? 50.000 paquets is little?
Re: Discussion OmniPeek winAircrack
Hi. Number of packet depends.. It exist more than one factor but don’t start crack before you capture less then 100 000 IVS. The gain is cca 10%. It means for 100 000 IVS you need capture approximately 1 000 000 packets.
Re: Discussion OmniPeek winAircrack
Can anyone confirm this to work? There doesn’t seem to be a lot of instruction here.
Re: Discussion OmniPeek winAircrack
yes,I’ve cracked many codes of the APs around my dormitory.And I’m using the code to surf the net~~When using aircrack,one crucial step (which is ignored by the authour) is that you should add the AP MAC Adress(the BSSID for example, 00:19:E0:CE:A7:B2)you want to crack to the text dialog.
ps: If you get enough packages please save the packages by their BSSID, that’s important. Another : http://www.pc-pda.com/article.asp?id=16
Re: Discussion OmniPeek winAircrack
When I run the install it says that it updates my driver, but according to my device manager my driver is still 10.1 something
Re: Discussion OmniPeek winAircrack
I’ve downgraded the driver from version 11.5.0.32 but "according to my device manager" the driver version is still the same(11.5.0.32) but one thing changed after the "downgrade" that Omnipeek can scan single channel too-I think.I have hp compaq 6820s nb with p/w3945abg & winxp+sp2. So, how can i find out:was the the downgrade succesful? Thx for help.
Re: Discussion OmniPeek winAircrack
I’m confused with how to use omnifilter… i load it up and it displays a whole bunch of unknown type BSSIDs and only one of the nodes has WEP (and at least 10 in the area have WEP, I don’t know why it’s not picking those up, or if it it…which ones those are)
And with the filter…what are we supposed to do? I click make filter and that little dialogue comes up and I click okay but i don’t know what is going on
Re: Discussion OmniPeek winAircrack
halo breed, i’m having trouble now.my omnipeek 4.1 sniffer only detect beacon alarms only.i’m using ipw3945 abg. how can i solve this problem and how can my sniffer detect the IVR? thanks..
Re: Discussion OmniPeek winAircrack
Hi, I’m having problem using omnipeek, it keeps crashing after some time capturing packets, a blue screen error jumps out and memory dump occur. I’m using windows xp sp2 home edition and intel pro wireless 3945 with driver 10.5.1.75. Can any one helps?
Re: Discussion OmniPeek winAircrack
Thats feature not problem. Windows have allways problem with drivers
Re: Discussion OmniPeek winAircrack
Can someone please email me and tell me how to do this i would be very thankful
Re: Discussion OmniPeek winAircrack
I’ve been able to capture packets using 11.1.0.100 found inside 11.1.0.5 pack
Re: Discussion OmniPeek winAircrack
I have managed to work the OmniPeek Personal so that I can filter only WEP information, yet I only get about 1 IV per BSSID. How do you get more?
FYI, I am using aircrack-ng 0.9.1 and when I launch using a captured .dmp file it says I only have 1 IV per bssid and then goes on to say I need something like 250 or 400 IV’s or whatever.