Pentesting • Wireless • Backtrack • Networking • Security • Ethical Hacking • Linux • Windows
You are not logged in. Please login or register.
Discussion of the Aireplay-ng Packet Injection Windows tutorial. No registration needed – but.. registered user are automaticly subscribed to the topic [because spam you need the registration now.. sorry].
Any update with Windows Vista? I am running Windows Vista Ultimate on a Dell Laptop Inspiron 6400 with an Intel Pro Wireless 3945ABG centrino adapter. I went to this site http://www.micro-logix.com/WinPcap/Supported.asp that states that many people have found success using this wireless adapter to capture network information.
Though I am knowledgeable in networking I still need some guidance.
1) Should I replace the replace the Intel Pro Wireless 3945ABG driver with the commview as suggested? Where do I get the commview driver?
2) Do I still need to use the Windows GUI program Wireshark network Analyzer using this method or BackTrack at all? Or can I just use the Airserv-ng, Airplay-ng and Aircrack-ng command lines for the entire process in Windows?
3) How would I be able to tell if my Intel Pro Wireless 3945ABG atually is capable of capuring IVs, are the steps different for Windows Vista Ultimate.
Any suggestions and/or information is greatly appreciated.
"Save the file as a .cap file. This is important! Omnipeeks native file format is .apc which aircrack and Wireshark can’t read!" The question is How to save it as .cap file in omnipeek personal 4.1? I get no option to save it in .cap format.
mdk3-v3 by ASPj also can be ported to cygwin and can work with airserv-ng so that the mdk3 functionality can work on windows. "MDK is a proof-of-concept tool to exploit common IEEE 802.11 protocol weaknesses." Download the cygwin port of MDK3 v3
After some long testing and tweaking, i got this to work on vista by installing the commview for wifi application with the driver first then running "airserv-ng -d commview.dll" command [ignore the quotes]. After this everything else worked fine…
How can i use the prog with this card broadcom 802.11b/g WLAN (bcm4***) I am using windows xp I hope you answ me 🙂 I try to find out but i didn’t find anything
broadcom is a fuckd up card and not all bcm cards support injection so its better you get a new card which fully supports injection, something like Dlink DWL-650
to Broadcom: Ouu yeah.. Holly true..
Is there any thing I can do to find one network key with this card? 🙁
Hi. You can try to solve the problem with Wifislax Linux 3 or 3.1. It supports a lot of minor chipsets.
I try it bud i couldn’t use it …. 🙁 is in Spanish …anw i try to install the chipset but nothing happened ???
I currently have a Realtek RTL 8187 wifi card on my ASUS mobo. Howin gods name do I crack a WEP with it. What programs/drivers do i need.. Is it even possible with this device? Ive been trying for about 3 straight days and im getting no where here. Someone PLEASE help me or send me an email to [email protected] Thanks
to Sir Thomas: What I remember one rtl wif card works with AiroPeekNG but I’m not sure with number of chipset. Check the wildpackets list of supported devices or our download directory to find up the right driver.
Hi all. I have a Windows XP system and Netgear wg511t wireless card. I’am trying to make this work. I have downloaded all necessary, but aireplay-ng won’t work says that aircap.dll was not found… but it’s there and i have downloaded comm view for wifi… but have no idea how to use. i was able to run airodump-ng before I put comm view on the computer. Someone help me? Thanks
Change the operating system. Linux may work with your card. BackTrack or WiFiSlax it’s possible to run like Live system to check up the compatibility with your card
lsmod
There are so many people trying to hack WEP when they don’t know the first thing about drivers
Hey, is .dmp OmniPeek file format the same as .dump in the aircrack-ng output? Does OmniPeek 4.1 have any limitation? Since it’s a freeware version.
It’s funny how so much people dont expect anything to be free 🙂
Hi. You can test it or use wildpackets filwe convertor. It support a lot of filetypes (outputs from applications). Here is the list supported file types and application.
OmniPeek WildPackets Eth WLAN WAN *.wpz
Advisor Agilent Eth TR FDDI WAN *.dat
DA-30 (DOS version) Acterna (formerly Wavetek Wandel Goltermann – WWG) Eth TR *.an1
DataGLANce IBM Eth TR *.dgc
Domino Acterna (WWG) Eth TR FDDI WAN *.cap
Fireberd500 Acterna (formerly TTC) Eth TR *.pkt
Fireberd500 PC Acterna (TTC) Eth TR FDDI *.cap
Internet Advisor LAN Agilent (pre-Win95) Eth TR FDDI *.eth *.trn
LAN Analyzer Agilent Eth TR FDDI *.cap
LAN900 Digitech, Inc. Eth TR *.dat
LANalyzer Novell Eth TR *.tr1
LinkViewPRO Acterna (WWG) Eth TR *.cap
Network Analyzer Agilent Eth TR WAN *.dat
NetMetrix Probe
(as source only) Agilent Eth *.trc
NetScout Probe
(as source only) NetScout Eth *.dat
Network Monitor (SMS 1.2) Microsoft Eth TR FDDI *.cap
Network Monitor (SMS 2.0) Microsoft Eth TR FDDI *.cap
NetXRay Network Associates Eth TR FDDI *.cap
Nokia Firewall
(as source only) Nokia Eth .dmp
Observer* Network Instruments Eth TR FDDI WLAN *.bfr
Protocol Inspector Fluke Eth TR FDDI *.cap
Sniffer (DOS version) Network Associates Eth TR FDDI WAN *.enc *.trc *.fdc *.syc
SnifferPro (compressed as source only) Network Associates Eth TR FDDI WLAN WAN *.caz *.cap
Snoop Sun Microsystems Eth TR FDDI *.snoop *.cap
Surveyor or OEM Finisar (formerly Shomiti) Eth TR FDDI, Gigabit *.cap
tcpdump/libpcap UNIX and Linux Platforms Eth TR FDDI WLAN *.dmp
hey all, i was wondering what you guys think is a better way, should i buy a usb fash drive and just get the linux live/ download backtrack3 or f u c k around trying to get windows xp to work?,i know commview for wifi doesnt support my USB N Belkin fd8053 wireless adapter,tried it and doesnt see it, everybody around me only has WEP enabled. Cheers
I have installed the drivers how you have specified dumped the commview.dll file from ca6 into the aircrack-ng directory yet i get (Adapter not found) after running airserv-ng -d commview.dll any one else with this problem using Netgear WPN511 or is there something im missing tell me if you think it will have to be backtrack for me : )
Try to use other operating system. Download BackTrack or WiFiSlax Linux.
Hello! I have loaded Packet injection Aireplay-ng for Windows XP from your site in December 2007. Thanks you, packet works well, but I have two questions:
1) the Command: airserv-ng-d commview.dll-p 12345-c 6 does not identify wifi adapter.и does not work.
2) the Command: airserv-ng-d " commview.dll|debug-p 12345-c 6-identifies and works very well.
And the Command: aircrack-ng *.ivs, does errors on 64 bit, and on 128 bit all works well. Explain to me why it occurs?
to Igor: Hi there. If you can’nt success console, try the tool AiroWizard.
Hi, I am very new to this field, but I have just been assign with a homework to crack WEP on an set up AP.
I have browse through the web try to find a tutorial on how things should be done in Window, and the 1st choice was to do it with Netstumbler and aircrack. I have encounter a problem when I try to use the airodump.exe to catch packets, because my NIC is Intel PRO/Wireless 2200GB network connection and the Omnipeek does not support that. It was wonder to learn from you that Commview will do the trick, thanks for the tip, but I am stuck again trying to run
airserv-ng -d commview.dll -p 12345 -c 6
airserv-ng -d "commview.dll|debug" -p 12345 -c 6
none of these worked, I have used ca2k.dll since this is the one I found in the commview, I have save it under the same folder as the aircrack. I have a few question want you to help me with as well:
1) should I first capture the packets with the Commview and then do the command mention above? After I do capture in Commview, I found that the source and destination IP were all in ??, it is normal?
2) After I have save the log of my capturing, will I be able to load it directly to the aircrack for analysis and cracking the key? If so, how should I do it.
3) After retrieving of the encryption key, I am assigned to download a file from the host computer, how do I complete this?
It will be great if you will be able to tutorial me through the problem, looking forward to hear from you soon since I have deadline to meet.
Thanks
Posts [ 1 to 25 of 39 ]
Powered by PunBB, supported by Informer Technologies, Inc.